APOLLO GROUP CO., LTD.

AP910 1 kVA – 3 kVA

Characteristics Technical Specifications Documents

● High frequency on-line double conversion technology

● DSP (Digital signal processors) control technology

● Active power factor correction (APFC), input power factor up to 0.99

● Output power factor 0.9

● Wide input voltage range (110 V ~ 300 Vac) and frequency range (40 ~ 70 Hz)

● Auto sensing frequency

● 50 / 60 Hz frequency conversion

● Cold start

● Rear ventilation design and variable speed fan

● Effective software and hardware protection

● Quick and stable charging, 90% capacity restored in 3 h (standard model UPS)

● Linear derating in low voltage input reducing battery discharging times

● Settable delayed start when power is restored

● Advanced battery management (ABM)

● Multiple functions settable via LCD: output voltage, EOD, auto-start, bypass mode, ECO mode and frequency conversion mode

● Multi-platform communications: RS232 (standard), USB / RS485 / SNMP / dry contacts (optional)

Available Options

● Optional USB, RS485 card, AS400 dry contacts, SNMP card, SMS alarms, EPO function, and 12 A charger (2/3 kVA only)

AP910S 1 - 3 kVA
MODEL AP9101S (H) AP9102S (H) AP9103S (H)
Capacity 1 kVA / 900 W 2 kVA / 1800 W 3 kVA / 2700 W
INPUT
Rated voltage 208 / 220 / 230 / 240 Vac
Voltage range 110 ~ 176 Vac (linear derating between 50% and 100% load ); 176 ~ 280 Vac (no derating); 280 ~ 300 Vac (derating 50%)
Frequency 40 ~ 70 Hz (auto-sensing)
Power factor ≥ 0.99
Bypass voltage range - 25% ~ +15% (settable)
Total harmonic distortion (THDi) ≤ 6%
OUTPUT
Voltage 208 / 220 / 230 / 240 Vac (settable via LCD)
Voltage regulation ± 1%
Frequency 45 ~ 55 Hz or 55 ~ 65 Hz (synchronized range); 50 / 60 Hz ± 0.1 Hz (battery mode)
Waveform Sinusoidal
Power factor 0.9
Total harmonic distortion (THDv) ≤ 2% (linear load), ≤ 5% (non-linear load)
Crest factor 3:01
Overload 105% ~ 125% for 1 min, 125% ~ 150% for 30 s, > 150% for 300 ms
BATTERIES
DC voltage 24 V (S) 36 V (S) 36 V (H) 48 V (S) 72 V (S) 72 V (H) 72 V (S) 96 V (S) 96 V (H)
Inbuilt battery  2 × 9 Ah 3 × 7 Ah / 4 × 9 Ah 6 × 7 Ah / 6 × 9 Ah 8 × 7 Ah /
Charging current (max.) 1A 6A 1A 6A 1A 6A
Recharge time Standard model: 90% capacity restored in 3 hours; Long time   model: depend on the capacity of battery
SYSTEM
Efficiency ≥ 90% (Mains mode) ≥ 91% (Mains mode) ≥ 92% (Mains mode)
≥   85% (Battery mode) ≥ 86% (Battery mode) ≥ 87% (Battery mode)
≥   95% (ECO mode) ≥ 96% (ECO mode) ≥ 97% (ECO mode)
Transfer time Mains mode to battery mode: 0 ms
    Inverter mode to bypass mode: 4 ms (typical)   
Protections Short-circuit,   overload, overtemperature, battery discharge protection and fan testing   protection
Communications RS232   (standard), USB / RS485 / dry contacts / SNMP (optional)
Display LCD + LED
Standards EN 62040-1, EN 62040-2, EN 61000-3-2, EN 61000-3-3, IEC   61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC   61000-4-8, IEC 61000-4-11, IEC 61000-2-2, IEC 62040-2, IEC 62040-1, IEC   62040-3
OTHERS
Operating temperature 0℃ ~ 40℃
Storage temperature -25°C ~  55°C (without batteries)
Relative humidity 0 ~ 95% (non-condensing)
Altitude ≤ 1000 m, derating 1% for each additional 100 m
IP rating IP 20
Noise level at 1m ≤ 50 dB 
Dimensions  144 × 312 × 216 144 × 317 × 216 144 × 336 × 216 144 × 417 × 216 191 × 419 × 335 191 × 418 × 335 191 × 419 × 335 191 × 418 × 335
(W ×   D × H) (mm)
Packaged dimensions 230 × 402 × 315 230 × 460 × 315 232 × 417 × 318 230 × 506 × 315 277 × 500 × 435 318 × 533 × 471 277 × 500 × 435 277 × 500 × 435
(W × D × H) (mm)
Net weight (kg) 11 12.8 6 16.4 23.1 10.5 24.3 29.4 11
Gross weight (kg)    11.3 14 7 17.8 24.7 12 25.9 31.1 12.5

AP910 Serial 1 kVA -3 kVA Datasheet -  PDF

AP910 Serial 1 kVA ~ 3 kVA User Manual -  PDF